Call 1800 339 638 for Customer Service
Product Image
Series Name
Application
Product Info
Datasheet Ref
Seismic Cable Restraints Type CR Seismic Cable Restraints Type CR

Installed on long runs of piping and ductwork to prevent lateral or longitudinal movement during seismic activity. Manufactured from exceptionally strong aircraft cable, and conform with the requirements of AS 1170.4 and NZS 4219.

Load Range: 2.5-14.7kN
Installed in pairs at 6 or 12m intervals.

Download
Seismic Restraint Type WMB/LMB Seismic Restraint Type WMB/LMB

Seismic restraint with integral bracket for welding to the side of equipment such as diesel generator sets and chillers. Provide a high degree of restraint in all direction from seismic displacments.

Restraint Loads:
Vertical LMB: 34kN
Lateral LMB: 20kN
Vertical WMB: 35kN
Lateral WMB: 55kN

Download
Seismic Rubber Mount Type RCMS Seismic Rubber Mount Type RCMS

Low deflection rubber for isolation of machinery with operating speeds of >2000RPM. Used where the means to restrain equipment in any direction from earthquake displacements is required.

Load Range: 13-900kg Restraint Loads:
Up: 900-17,000N
Down: 260-17,000N
Lateral: 530-5,100N
Deflection: 4mm
Free Height: 76-111mm
Colour coded load range.

Download
Seismic Spring Mount Type CDBMH Seismic Spring Mount Type CDBMH

Spring mount for a high degree of isolation of equipment noise and vibration for a range of heavier loads. Used where the means to restrain equipment in any direction from earthquake displacements is required.

Load Range: 1,265-2,200kg
Restraint Loads:
Vertical: 22kN
Lateral: 11kN
Deflection: 50mm
Height: 255mm

Download
Seismic Spring Mount Type CDM Seismic Spring Mount Type CDM

Spring mount for a high degree of isolation of equipment noise and vibration for a wide range of loads. Used where the means to restrain equipment in any direction from earthquake displacements is required.

Load Range: 65-1,115kg
Restraint Loads:
Vertical: 11,000N
Lateral: 5,500N
Deflection: 50mm
Height: 220mm

Download
Seismic Spring Mount Type CLDM Seismic Spring Mount Type CLDM

Spring mount for a high degree of isolation of light equipment noise and vibration. Used where the means to restrain equipment in any direction from earthquake displacements is required.

Load Range: 6-55kg
Restraint Loads:
Vertical: 750N
Lateral: 1,200N
Deflection: 50mm
Height: 137mm

Download
Seismic Spring Mount Type CLM Seismic Spring Mount Type CLM

Spring mount for the isolation of equipment noise and vibration for a wide range of loads. Used where the means to restrain equipment in any direction from earthquake displacements is required.

Load Range: 10-650kg
Restraint Loads:
Vertical: 7,000N
Lateral: 3,500N
Deflection: 25mm
Height: 158mm

Download
Seismic Spring Mount Type CSM Seismic Spring Mount Type CSM

Basic spring mount for the isolation of equipment noise and vibration. Used where the means to restrain equipment in any direction from earthquake displacements is required.

Load Range: 10-200kg
Restraint Loads:
Vertical: 2,000N
Lateral: 1,000N
Deflection: 25mm
Height: 97mm

Download
Seismic Spring Mount Type CTM Seismic Spring Mount Type CTM

Spring mount for a very high degree of isolation of equipment noise and vibration for a range of loads. Used where the means to restrain equipment in any direction from earthquake displacements is required.

Load Range: 150-600kg
Restraint Loads:
Vertical: 6kN
Lateral: 3kN
Deflection: 75mm
Height: 245mm

Download
Seismic Spring Mount Type CWDM Seismic Spring Mount Type CWDM

Spring mount for a high degree of isolation of equipment noise and vibration for a wide range of loads. Used where the means to restrain equipment in any direction from earthquake displacements is required.

Load Range: 50-350kg
Restraint Loads:
Vertical: 6,000N
Lateral: 3,000N
Deflection: 50mm
Height: 190mm

Download
12